As an expert in mobile technology, I’m thrilled to bring you an in-depth guide on the Oppo A3s CPH1853 ISP Pinout. This guide is designed to help you understand the intricacies of this device and how to use the ISP Pinout to perform a hard reset or bypass the FRP (Factory Reset Protection).
Oppo A3s Device Overview:
The Oppo A3s is a robust smartphone that boasts a 6.2-inch IPS LCD display with a resolution of 720×1520 pixels and a 19:9 aspect ratio. It’s powered by a Snapdragon 450 SoC and an Adreno 506 GPU, making it a reliable device for everyday use. The Oppo A3s comes in various memory configurations, including 2GB/3GB/4GB RAM and 16GB/32GB/64GB of internal storage, expandable via a microSD card.
The device features a dual rear camera setup (13MP+2MP) and an 8MP front camera, perfect for capturing high-quality photos and videos. It also includes a 4,230mAh battery with 20W VOOC fast charging support, ensuring your device stays powered throughout the day.
What is ISP PinOUT?
ISP, or In-system programming, also known as in-circuit serial programming (ICSP), is a method used for programming or repairing the logic board (motherboard) of an electronic device such as a mobile or computer. The ISP Pinout connection is located on the logic board of your device. By shorting the pins together, you can power or signal the logic board, allowing you to perform various tasks like hard resetting the device or bypassing the FRP lock.
How to Use the Oppo A3s ISP Pinout
Before we proceed, it’s crucial to note that this guide is intended for the Oppo A3s (CPH1853) variant only. You will need a Windows PC/Laptop, a USB cable, and the correct ISP Pinout.
Oppo A3s ISP Pinout Image:
Before proceeding, ensure you have downloaded the UFi Box eMMC Service Tool and installed the Oppo USB Drivers on your PC. These tools are essential for the steps that follow.
This guide is intended for the Oppo A3s (CPH1853) variant only. You will need a Windows PC/Laptop and a USB cable.
Steps to Bypass FRP Lock on Oppo A3s:
- Open the back panel of the device.
- Connect the wire with the correct ISP Pinout.
- Connect the ISP Pinout to the UFi Box and connect your device via USB cable to the PC.
- Go to the Device Manager on your PC.
- You will see your device in the list > run the UFi Box and locate the scatter file.
- Go to the user Partition / Special Task and click on Reset FRP on the UFi Box.
Steps to Hard Reset Oppo A3s (Bypass Pattern Lock):
- Remove the back panel of the device and connect the wire to the ISP Pinout.
- Connect the correct ISP Pinout to the UFi Box.
- Connect your Oppo A3s to the PC via a USB cable.
- Open Device Manager on your PC.
- If your device is located there, run the UFi Box.
- Locate the scatter file > go to the Partition / Special Task on the UFi Box.
- Click on Factory Reset.
By following these steps, you can successfully bypass the FRP lock or perform a hard reset on your Oppo A3s device. Remember, this process should be performed by a professional or someone with technical knowledge to avoid any damage to the device.
Frequently Asked Questions
Q: What is the CPH1853 model name?
A: The CPH1853 is the model name for the Oppo A3s smartphone.
Q: What is the reset code for A3s?
A: The Oppo A3s doesn’t have a specific reset code. However, you can perform a hard reset or factory reset by using the ISP Pinout and UFi Box, as described in the steps above. Please note that this should be done by a professional or someone with technical knowledge to avoid any damage to the device.
Q: How do I format A3s?
A: To format or perform a hard reset on your Oppo A3s, you can follow the steps provided in the “Steps to Hard Reset Oppo A3s (Bypass Pattern Lock)” section of this article. This involves using the ISP Pinout and UFi Box, and should be done by a professional or someone with technical knowledge.
Q: How do I put my Oppo A3s in recovery mode?
A: To put your Oppo A3s in recovery mode, follow these steps:
- Power off your device.
- Press and hold the Volume Down button and the Power button simultaneously until the device turns on.
- You should see the Oppo logo and an option to enter recovery mode.
- Use the Volume buttons to navigate to the “Recovery Mode” option and the Power button to confirm.
- You are now in recovery mode.
Please note that these steps may vary slightly depending on your device’s software version.